6200 Series ball bearing

The 6200 Series bearings feature deep, honed raceways, resulting in a perfectly balanced bearing.
These Miniature Bearing are available in open, sealed or shielded configurations.

The 6200 Series bearing is specifically designed to provide maximum performance by means of precise ball complement selection.

Features:
1): Suitable for very high rotating speeds
2): Well suited for medium high radial and axial loads in one or both directions
3): Various seals and grease variants available for different operating conditions
4): Numerous clearance and tolerance classes available for different operating conditions

With single ring groove	Single shielded	single sealed
With locatining snap ring	Double Shielded	double sealed

 

6200 Series Specifications

TYPE	Overall dimension				Basic Load		Limiting Speeds		Weight
	d	D	B	rsmin	(Cr)	(Cor)	Grease	Oil
	mm				KN		rpm		KG
625	5	16	5	0.3	1.45	0.74	32000	40000	0.005
626	6	19	6	0.3	2.34	0.885	34000	40000	0.008
627	7	22	7	0.3	3.35	1.4	32000	37000	0.014
628	8	24	8	0.3	4	1.59	31000	36000	0.016
629	9	26	8	0.3	4.45	1.95	30000	35000	0.019
6200	10	30	9	0.6	5.1	2.38	24000	30000	0.032
6201	12	32	10	0.6	6.82	3.05	22000	27000	0.035
6202	15	35	11	0.6	7.65	3.72	19000	24000	0.045
6203	17	40	12	0.6	9.58	4.78	17000	21000	0.064
6204	20	47	14	1	12.8	6.65	14000	18000	0.103
6205	25	52	15	1	14	7.88	12000	16000	0.127
6206	30	62	16	1.1	19.5	11.5	10000	13000	0.202
6207	35	72	17	1.1	25.5	15.2	9000	11000	0.288
6208	40	80	18	1.1	29.5	18	8200	10000	0.368
6209	45	85	19	1.1	31.5	20.5	7600	9300	0.416
6210	50	90	20	1.1	35	23.2	7000	8600	0.463
6211	55	100	21	1.5	46.3	29	6300	7500	0.61
6212	60	110	22	1.5	47.5	32.5	6000	7000	0.78