6900 Series ball bearing

The 6900 Series, extra light ball bearings are normally used in applications where space limitations are a primary consideration and shaft sizes are relatively large. This series is available in sealed and shielded configurations. Smaller but more ball complements still enable the bearing to withstand appropriate loading capability.

Ball bearing is composed of an outer ring, inner ring, a set of ball and a cage. Structure is simple and easy maintenance. Mainly used to bear radial load, but also bear certain axial load, when the axial clearance increased, will have the performance of angular contact ball bearings and can bear large axial load, this kind of bearing low friction coefficient, high limiting speed, size range and diverse.

They are widely used in Motors, car engines, power tools, robots, air-conditioner motors, vacuum cleaner motors, oil fume motors, office equipments, fitness equipments, textile machinery and so on.

With single ring groove	Single shielded	single sealed
With locatining snap ring	Double Shielded	double sealed

 

6900 Series Specifications

TYPE	Overall dimension				Basic Load		Limiting Speeds		Weight
	d	D	B	rsmin	(Cr)	(Cor)	Grease	Oil
	mm				KN		rpm		KG
619/5	5	13	4	0.2	1.07	0.42	40000	47000	0.0024
619/6	6	15	5	0.2	1.47	0.6	37000	44000	0.0039
619/7	7	17	5	0.3	1.6	0.71	35000	41000	0.0053
619/8	8	19	6	0.3	2.23	0.91	33000	39000	0.0072
619/9	9	20	6	0.3	2.48	1.09	32000	38000	0.0075
61900	10	22	6	0.3	2.69	1.27	30000	36000	0.01
61901	12	24	6	0.3	2.89	1.46	27000	32000	0.011
61902	15	28	7	0.3	4.31	2.25	24000	28000	0.017
61903	17	30	7	0.3	4.59	2.55	22000	26000	0.018
61904	20	37	9	0.3	6.37	3.68	19000	23000	0.036
61905	25	42	9	0.3	6.66	4.18	16000	19000	0.041
61906	30	47	9	0.3	7.24	5.01	14000	17000	0.045
61907	35	55	10	0.6	10.39	7.16	12000	15000	0.073
61908	40	62	12	0.6	13.02	9.2	11000	13000	0.112
61909	45	68	12	0.6	13.49	10.3	9800	12000	0.132
61910	50	72	12	0.6	13.9	10.99	8900	11000	0.133
61911	55	80	13	1	15.9	11.4	8000	9500	0.19
61912	60	85	13	1	16.5	12	7500	9000	0.20