6800 Series ball bearing

Deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies.

The 6800 has a lower coefficient of friction and higher speed rating compared to other ball bearing types of the same size. When the use of a thrust type ball bearing is not suitable due to high speeds the 6800 series can be used to bear pure axial loads. The 6800 series is available in open, sealed or shielded configurations.

With single ring groove	Single shielded	single sealed
With locatining snap ring	Double Shielded	double sealed

 

 

6800 Series Specifications

TYPE	Overall dimension					Basic Load		Limiting Speeds		Weight
	d	D		B	rsmin	(Cr)	(Cor)	Grease	Oil
	mm					KN		rpm		KG
618/5	5	11	3	5	0.15	0.770	0.320	53000	63000	0.0012
618/6	6	13	3.5	5	0.15	1.080	0.440	48000	56000	0.002
618/7	7	14	3.5	5	0.15	1.170	0.510	45000	53000	0.0022
618/8	8	16	4	5	0.2	1.250	0.590	40000	48000	0.003
618/9	9	17	4	5	0.2	1.330	0.660	38000	45000	0.0034
61800	10	19		5	0.3	1.59	0.75	30000	36000	0.005
61801	12	21		5	0.3	1.91	1.04	29000	35000	0.006
61802	15	24		5	0.3	2.07	1.25	26000	31000	0.007
61803	17	26		5	0.3	2.13	1.36	24000	28000	0.008
61804	20	32		7	0.3	3.48	2.23	21000	25000	0.019
61805	25	37		7	0.3	3.68	2.63	18000	21000	0.022
61806	30	42		7	0.3	4	3.15	15000	18000	0.026
61807	35	47		7	0.3	4.27	3.6	13000	16000	0.029
61808	40	52		7	0.3	4.41	3.89	12000	14000	0.033
61809	45	58		7	0.3	6.40	5.65	11000	12000	0.04
61810	50	65		7	0.3	6.61	6.08	9000	11000	0.052
61811	55	72		9	0.3	8.32	6.2	8500	10000	0.083
61812	60	78		10	0.3	8.71	6.7	7500	9000	0.11